31/5/2019

Painted the roof repair  and the steel reinforcer for the entrance pillar grey today.

Dropped the exhaust down pipe off the manifold so I could cut the broken flexi off the end.  Trimmed off the end of the long pipe too.  Ordered some steel tube and clamps to enable connecting up with the length of flexi that I already have.  I will have to lengthen the main pipe at some time so as to move the silencer into its correct position behind the rear axle.

Lifted the gear box cover inside the bus then removed the section of floor the comprises the entrance.  This had erupted due to corrosion in the support structure and rotted at the ends.  I cut off the remains of the screws with the angle grinder with a view to removing them from underneath tomorrow.