Colleected the glass from K.W. Glass in Braintree on Monday, then fitted the glass to the frame and started to install it in the bus.  It is a very poor fit around the top right hand corner but hopefully will ease back into place with a bit of careful effort.  I left the remainder of the screws for now.   Next, I continued applying chrome wrap to window components.  Finished one drop light so concentrated on preparing other components for assembling a halfdrop window This meant fitting the top bar to one of the glass panes that fit in the lower falf of the window frame.  Whilst the glazing silicone was setting I applied the felt to the vertical runners, which is another slow job but satisfying.   I completed three pairs then once the silicone was set I started to build up a complete window pan.  I almost completed this but ran out of time.