First job of the week was to permanently fit the panel around the foothold immediately behind the cab.  Making sure there was room to fit the O/S indicator meant a slight modification to the location of the conduit bringing the cable up to the indicator in order to provide long enough tails to connect to the indicator base.  Work continued fitting the waist panels, including marking out and the final panel from remnant left from the wheelarch panel.  Next a small, fiddly panel had to be made that finishes the waist rail and folds around the cab door pillar rebate;  I did this twice though the second effort was not much of an improvement on the first!   Finally the panel that completes the area below the cab step was cut and fitted and the kick panel marked out for cutting.