Wheel stud refitted to hub, hub rear cleaned and primed. Spacer and bellows seal cleaned and refitted to axle tube. One brake shoe cleaned and casting treated with Vactan. Brake dust shield back plate fitted to drivers side of axle.
Monthly Archives: September 2018
3/9/2018
Removed the damaged road wheel stud from the offside rear hub – had to heat the lock nut to undo it but it came off easily after that. Used the arc welder to rebuild the sections damaged when the nut was cut off and then cut a new thread, all good now.
Before repair
2/9/2018
Bolted up the springs finally. New washers fitted and nearside u-bolts trimmed to correct length. I had to grind a bit of the rivet head away on the bottom leaf to allow the u-bolt saddle to seat against the bottom of the spring without a gap. All the cotter bolts and nuts are fitted and tight but the greasers still need to be screwed into the shackle pins. This series of pictures shows the new springs:
